TEMPTU PRO PLUS AIRBRUSH COMPRESSOR

EMPTU's most versatile, professional airbrush compressor. Weighing only 1 lb, the Pro Plus gives artists flexibility to apply custom-blended or pre-filled ready-to-use makeup and is designed to work with any single or dual-action top-feed airbrush gun/

Attaching the Reversible Airbrush Holder: First attach the small round cushion tabs on the inside of the two hooks of the holder. This will reduce vibration on your airbrush gun. The holder can be placed on either the right or left side on top of the Pro Plus unit.

Attaching the Airhose to the Compressor: Screw one end of the 1/8" metal fitting of the Deluxe Flex Airhose on to the 1/8" metal fitting on the compressor. Make sure that the fitting is tightened all the way so you will not lose pressure.

Attaching Your Airbrush Gun: First be sure that your gun has a 1/8" metal fitting. Screw the end of your Deluxe Flex Airhose to the bottom of your airbrush gun.

Once ready for use, be sure to press down on the trigger of your gun before turning on the unit. This will release any trapped air. While the trigger is down, turn the unit on and air will begin to flow.

To regulate air pressure, adjust the pressure dial regulator on the front of the unit. Turn the pressure dial left to increase pressure and right to decrease pressure.

The Pro Plus comes equipped with a safety shut-off which will turn the unit off after 15 minutes of running.

To avoid back pressure and to keep your unit running at optimum performance, keep the pressure valve at 1/16" from the highest pressure setting. You will not lose any pressure and this will help the life of the compressor motor.